Bmw E60 Eyebrow Light Replacement
Introduction
The BMW E60 is a popular sedan that has been around for quite some time. It is known for its sleek design and impressive performance. One of the standout features of the E60 is its eyebrow lights, which are located above the headlights. These lights are not only aesthetically pleasing, but they also serve a practical purpose by improving visibility on the road. However, like any other component of a car, the eyebrow lights can malfunction or burn out over time. In this article, we will guide you through the process of replacing the eyebrow lights on your BMW E60.
Step 1: Gather Your Materials
Before you begin the replacement process, you will need to have the necessary materials. These include a new set of eyebrow lights, a screwdriver, and a pair of pliers. You may also want to have a pair of gloves and a flashlight handy.
Step 2: Remove the Old Eyebrow Lights
The first step in the process is to remove the old eyebrow lights. To do this, you will need to open the hood of your car and locate the lights. They are situated above the headlights and are held in place by two screws. Use your screwdriver to remove the screws and gently pull the lights out of their sockets. Be careful not to damage the wiring or the surrounding area.
Step 3: Install the New Eyebrow Lights
Once you have removed the old lights, it is time to install the new ones. Begin by inserting the lights into their sockets and securing them with the screws. Make sure that the lights are aligned properly and that they sit flush with the surrounding area. Once you have secured the lights, test them to ensure that they are working properly.
Step 4: Repeat the Process on the Other Side
After you have successfully replaced the eyebrow light on one side of your BMW E60, repeat the process on the other side. This will ensure that both lights are functioning properly and that your car looks symmetrical.
Step 5: Close the Hood and Test the Lights
Once you have replaced both eyebrow lights, close the hood of your car and test the lights to ensure that they are working properly. Turn on your headlights and check that the eyebrow lights are illuminated. If they are not, check the wiring and connections to make sure that everything is properly connected.
Conclusion
Replacing the eyebrow lights on your BMW E60 is a simple process that can be done in just a few steps. By following the steps outlined in this article, you can ensure that your car looks great and that you are able to see clearly on the road. If you are unsure about any part of the process, be sure to consult with a professional mechanic.